beautypg.com

D. pre- use check list, Warning – Harman Stove Company P35I User Manual

Page 8

background image

8

P35i Fireplace Insert

Pellets or Corn/Pellet Mixture Only

Save These Instructions

3-90-775R15_04/13

D. Pre- Use Check List

1.

Place the appliance in a location near the

final installation and follow the procedures

below:

2.

Open the appliance and remove all articles

packed inside. Inspect all items for shipping

damage. Notify dealer of any missing or

damaged goods.

3.

All safety warnings have been read and

followed precisely.

4.

This Owner's Manual has been read in it's

entirety.

5.

Floor protection requirements have been

read and followed.

6.

The flue connector has been installed in

accordance with the instructions herein.

7.

The proper clearances from the appliance

and chimney connector to combustibles

have been met.

8.

The masonry chimney has been cleaned

and inspected by a professional, or the

factory built metal chimney is installed

according to the manufacturers instructions.

9.

The chimney meets the minimum height

requirements.

10.

All labels and hang tags have been removed

from the glass.

11.

All plated surfaces have been wiped clean,

if applicable.

12.

The room sensor and any additional cable

has been installed properly.

13.

A properly grounded electrical receptacle is

available within reach of the unit's power

cord.

14.

A good quality surge protector is highly

recommended to protect the electronics.

Fire Risk.

Hearth & Home Technologies

disclaims any responsibility for, and

the warranty will be voided by, the

following actions:

• Installation and use of any damaged appliance.

• Modification of the appliance.

• Installation other than as instructed by Hearth &

Home Technologies.

• Installation of substitute materials or replacement

parts not approved by Hearth & Home Technologies

• Operating appliance without fully assembling all

components.

• Do NOT Overfire.

Or any such action that may cause a fire hazard.

Inspect appliance and components for

damage. Damaged parts may impair safe

operation.

• Do NOT install damaged components.

• Do NOT install incomplete components.

• Do NOT install substitute components.

Report damaged parts to dealer.

WARNING

WARNING