Harman Stove Company P35I - Manual (Page 4)

4
P35i Fireplace Insert
Pellets or Corn/Pellet Mixture Only Save These Instructions 3-90-775R15_04/13
1
Listing and Code Approvals
A. Appliance Certification
Model: P35i Insert
Laboratory: OMNI-Test Laboratories, Inc.
Report No. 135-S-25-6.2
Type: Solid Fuel Room Heater / Fireplace
Insert.
Standard(s): ASTM E1509-04, ULC S628-93 and
ULC/ORD C1482-M1990
This appliance is also approved for installation in a
shop.
B. Mobile Home Approved
This appliance is approved for Installation in mobile/
manufactured homes. The structural integrity of the
mobile home floor, ceiling and walls must be maintained.
The appliance must be properly grounded to the frame of
the mobile home, and must never be installed in a room
designated for sleeping. The unit must have provisions for
an outside air source when installed in a mobile home.
C. Glass Specifications
This appliance is equipped with 5mm ceramic glass. Replace
glass only with 5mm ceramic glass. Please contact your
dealer for replacement glass if needed
D. Electrical Rating
115 VAC, 60 Hz,
3.6 Amps (Start-up); avg. 1.5 Amps (Normal Run)
E. BTU & Efficiency Specifications
* BTU input will vary, depending on the type of fuel you
use in your stove. Moisture and ash content can affect
performance.
† Corn is approved for burning only when mixed with wood
pellets.
Hopper Capacity-
#1-70-774235 (23½ ")
Particulate Emissions
Rating:
*BTU Input:
Heating Capacity:
Hopper Capacity-
#1-70-774195 (19½ ")
Fuel:
Shipping Weight:
41 lbs.
Wood pellets / Corn†
289 lbs.
1,500 sq. ft.
0 or 6,000 - 35,000 / hr
Exempt from EPA per
40 CFR, Method 28A
62 lbs.