HP 2040D - Manual (Page 25)

Series 2040 Test System
Series 2040 Maintenance Manual V2.00 Diagnostics
24
error. If a test listed did not have any slot information listed in the results, the
slot will be listed as ‘Unknown’. To view the details of each individual fail or
system error number from the test results, use the ‘View Log File’ menu item.
Refer to the Selftest documentation to aid in interpreting these test results.
Close - Selecting this menu item closes the currently selected diagnostic file
and clears all result information from the program’s windows. This clears the
on-screen Testhead board configuration and removes any individual test
results from the ‘Report Details’ window. This menu item is provided only for
the convenience of the user. It is not mandatory to ‘Close’ one test before
opening another for exam. However, it may be used to provide an obvious
separation in the examination of different test result sets.
Exit - Selecting this menu item closes the current diagnostic file, clears
configuration information from the program, and closes and exits the program.