HP sv6 - Manual (Page 90)

file configuration
Chapter 3 90
INTERFACE_NAME[0]="lan0"
IP_ADDRESS[0]="16.6.176.65"
SUBNET_MASK[0]="255.255.255.0"
BROADCAST_ADDRESS[0]=""
INTERFACE_STATE[0]=""
DHCP_ENABLE[0]=0
INTERFACE_NAME[1]="lan1"
IP_ADDRESS[1]="192.168.1.9"
SUBNET_MASK[1]="255.255.255.0"
BROADCAST_ADDRESS[1]="192.168.1.255"
INTERFACE_STATE[1]=""
DHCP_ENABLE[1]=0
• /etc/rc.config.d/slsd - This file enables the SLS/d daemon.
After all reboots, the daemon will start automatically.
#************* File: /etc/rc.config.d/slsd ****************
#SLSd configuration. See /usr/lib/X11/Xserver/info/screens/hp
#SLSD_DAEMON:Set to 1 to start Distributed Single Logical Screen
#daemon. Set to 0 to disable Distributed Single Logical Screen
#daemon
SLSD_DAEMON=1