HP sv6 - Manual (Page 44)

installation and user information
installation process
Chapter 2 44
6. Verification
Run the verification test to verify that the cabling and network
information are correct:
• log in to the master system as root
• init 3
• Log in at the CDE screen.
• Open a terminal window and run:
/opt/graphics/OpenGL/bin/setpipes -test
WARNING Do not use any other options with -test
• If you see:
— Solid red, green or blue triangles rotating in each rectangle
(at varying speeds).
— Black background.
— Numbers are in order, left to right, top to bottom.
— PASS: System is Ready
• If you see:
— Speckles.
— Strange color changes.
— Missing triangles.
— Unexpected patterns (e.g. checkerboard pattern, completely
black or red rectangle).
— FAIL: See the hp visualization center sv6 Troubleshooting
Guide at http://www.hp.comgo/workstationsupport to
correct the cabling or networking problem. Check the
verify.log file created in the current directory.
• Touch any key on the keyboard or press a mouse button to exit
the animation
• Use CTRL+SHIFT+BREAK to get back to the log in prompt.
7. Configure ds2100