HP sv6 - Manual (Page 54)

installation and user information
updating software
Chapter 2 54
( Actions)
(Add Target Group)
name: /var/opt/ignite/sps/sv6files/sv6_targets
[OK]
(Actions)
(Show Software For Selection)
Source Host Name: svm
Source Depot Path: / var/opt/sps/depots
[OK]
12. In the software selection window:
Left click to select PHNE_25612
Right click on PHNE_25612
(
Mark For Install)
(Actions)
(Install)
Assign an optional job title for monitoring and reference pur-
poses.
Example: march gb patch
[OK] [OK]
Watch the Job Browser and Job Results window for confirmation,
warning, or error messages, which may need your response.
[Done]
step 4: verification
13. Check logs for errors.
Highlight the system with errors or warnings, then click [Show Log] .
Copies of SD logs can be found at /var/adm/sw/*.log
14. If a pop-up window requests a mandatory reboot, click [Done] . By
default, auto-reboot is disabled for the master node only, so the
slaves will automatically reboot.
Reboot the master system: /sbin/reboot –q
15. Verify that the new software shows up in the software list.
swlist |grep PHNE_25612
The name and description should show up as output. Example:
PHNE_25612 1.0 1000Base-SX/T B.11.00.[02-11] cumul. patch