HP 403349-003 - Manual (Page 43)

Removal and replacement procedures 43
2. Using an Allen wrench, insert and tighten two black cap screws to secure each electromagnetic lock
to its electromagnetic lock bracket.
3. Install the top electromagnetic lock bracket to the rack chassis in the location you noted during
removal.
a. Align the electromagnetic lock assembly to the rack chassis in the location you noted during
removal.
b. Using a T-25 Torx driver, insert and tighten two M5.5 self-tapping screws into the inner row of
rack holes to secure the electromagnetic lock assembly to the rack chassis.
4. Repeat step 3 for the bottom electromagnetic lock bracket.