Water inlet coupling, Removing the water inlet coupling, Sps–coupling, mcs, inlet – HP 403349-003 User Manual
Page 102: Water inlet, Coupling, On p
Removal and replacement procedures 102
6.
Connect the seven electrical cables to the front of the water group controller.
7.
Replace the AC transfer switch ("
Replacing the AC transfer switch
8.
Complete the operation checklist (on page
Water inlet coupling
The water inlet coupling is located on the inlet water hose connected to the MCS unit.
The following tools are required for installation:
•
5-mm Allen wrench
Removing the water inlet coupling
1.
Power down the MCS unit. ("
2.
Shut off the water flowing into the MCS unit. ("