Display problems – Canon EOS-1D X Mark III DSLR Camera (Body Only) User Manual
Page 902
Display problems
The display starts with [ ] My Menu, or the [ ] tab alone is displayed.
[
Menu display
] on the [
] tab is set to [
Display from My Menu tab
] or [
Display only
My Menu tab
]. Set [
Normal display
).
The file name's first character is an underscore (“_”).
Set [
:
Color space
] to [
sRGB
]. If [
Adobe RGB
] is set, the first character will be an
).
The fourth character in the file name changes.
[ :
File name
] is set to [
*** + image size
]. Select either the camera's unique file name
or the file name registered in User setting 1 (
).
The file numbering does not start from 0001.
If the card already contains recorded images, the image number may not start from
0001 (
).
The shooting date and time displayed are incorrect.
Make sure the correct date and time are set (
).
Check the time zone and daylight saving time (
).
The date and time are not in the image.
The shooting date and time do not appear in the image. The date and time are recorded
in the image data as shooting information. When printing, you can imprint the date and
time in the picture, using the date and time recorded in the shooting information (
).
[###] is displayed.
If the number of images recorded on the card exceeds the number the camera can
display, [
###
] will be displayed.
The screen does not display a clear image.
If the screen is dirty, use a soft cloth to clean it.
The screen display may seem slightly slow in low temperatures or may look black in
high temperatures, but it will return to normal at room temperature.
902