Hdmi – Canon EOS-1D X Mark III DSLR Camera (Body Only) User Manual
Page 292
HDMI
Time code
Time codes can be added to movies as you record them to an external device via HDMI.
•
Off
No time code is added to HDMI video output.
•
On
Time codes are added to HDMI video output. When [
On
] is set, [
Rec Command
] is
displayed.
Rec Command
For HDMI video output recorded by an external device, you can synchronize recording
to when you start and stop recording movies on the camera.
•
Off
Recording is started and stopped by the external device.
•
On
Recording by an external device is synchronized to starting/stopping recording on
the camera.
Caution
Time codes are not added to HDMI video output when you record High Frame Rate
movies with [
Count up
] in [
Time code
] set to [
Free run
].
To determine compatibility of external recording devices with [
Time code
] and [
Rec
Command
] functions, check with the device manufacturer.
Even with [
Time code
] set to [
Off
], external recording devices may add time codes
to movies, depending on their specifications. For details on device specifications
relevant to adding time code to HDMI input, check with the device manufacturer.
292