Canon EOS-1D X Mark III DSLR Camera (Body Only) - Manual (Page 624)

Auto Retry If Transfer Fails
If transfer fails, the camera's < > lamp blinks in red. In this case, the following screen
is displayed after you press the < > button and select [ : Network settings ].
To resolve the error displayed, see Troubleshooting .
Once you have resolved the issue, the images that could not be sent initially will be
transferred automatically. With this option activated, transfer is attempted again
automatically after failure, whether automatic transfer is used or captured images are
transferred manually via FTP. Note that if you cancel transfer or turn the camera off, auto
retry is not attempted.
See
Transferring Multiple Images at Once and transfer images as needed.
Note
To automatically log off and disconnect from the LAN after transfer, you can
configure power-saving on the [
FTP transfer settings ] screen ( ).
If you prefer not to disconnect from the LAN, set [ Power saving ] on the [ FTP
transfer settings ] screen ( ) to [ Disable ].
624