Canon EOS-1D X Mark III DSLR Camera (Body Only) User Manual
Page 896
Expanded ISO speeds cannot be selected for still photo shooting.
Check the [
ISO speed range
] setting under [
:
ISO speed settings
].
Expanded ISO speeds are not available when [
:
Highlight tone priority
] is set to
[
Enable
] or [
Enhanced
].
Expanded ISO speeds are not available when [
:
HDR shooting
] is set to
[
Enable
].
Even if I set a decreased exposure compensation, the image comes out
bright.
Set [
:
Auto Lighting Optimizer
] to [
Disable
). When [
Low
], [
Standard
], or
[
High
] is set, even if you set a decreased exposure compensation or flash exposure
compensation, the image may come out bright.
I cannot set the exposure compensation when both manual exposure
and ISO Auto are set.
to set the exposure compensation.
Exposure compensation is not performed in flash photography.
Not all the lens aberration correction options are displayed.
Although [
Chromatic aberr corr
] and [
Diffraction correction
] are not displayed when
[
Digital Lens Optimizer
] is set to [
Enable
], both functions are applied in shooting, as
when set to [
Enable
].
During movie recording, [
Digital Lens Optimizer
] or [
Distortion correction
] will not be
displayed.
Images are not displayed after shooting in multiple-exposure shooting.
When [
On:ContShtng
] is set, images are not displayed for review after capture, and
image playback is not available (
).
Using flash in <
> mode lowers the shutter speed.
To provide suitable exposure for subjects and backgrounds, the shutter speed is
automatically reduced (slow-sync shooting) for shots under low light in night scenes or
with similar backgrounds. To prevent a slow shutter speed, set [
Flash sync. speed in
Av mode
] in [
:
External Speedlite control
] to [
1/250-1/60sec. auto
] or [
1/250 sec.
(fixed)
896