Datavideo SE-4000 8-Channel 4K Video Switcher - Manual (Page 99)

99
Loading an existing Logo from Memory
The SE-4000 allows the user to load still logo from the machine’s memory to the logo buffer
(Logo 1 or 2), then press either Logo 1 or Logo 2 button to enable the loaded logo on both the
Preview and Program Out. Follow the steps outlined below to load the desired still logo from
memory.
1. Open the still logo sub menu in the Files menu.
2. Tap Load Logo.
On the page shown above, you should find a thumbnail view of three logos. Use the right/left
arrow buttons at the bottom of the page to browse all other logos which are shown in
numerical order. Blank thumbnails are unused memory slots.