Datavideo SE-4000 8-Channel 4K Video Switcher - Manual (Page 95)

95
Note: The Stinger transition is currently under development so the function cannot be
used.
CUT Button
The CUT button is used to immediately switch between the currently selected
Program and Preview sources.
MIX Button
The MIX button is selected when a dissolve or fade transition between the
selected Program and Preview sources is required. This MIX transition is
produced by then moving the T-Bar manually or by pressing the AUTO TRANS
button. To configure the mix transition time, open the GUI, then the Start menu, and modify
the M/E value in the Transition sub menu accordingly.
Program View
Before Transition
Transition in Progress
(MIX Effect)
Program View
After Transition
WIPE Button
The WIPE button is selected when a 2D wipe transition between the selected
Program and Preview sources is required. This WIPE transition effect is produced
by then moving the T-Bar manually or by pressing the AUTO button. Follow the
menu path GUI menu  Start  WIPE Effects  WIPE to select the 2D WIPE style.
Program View
Before Transition
Transition in Progress
(WIPE Effect)
Program View
After Transition
Stinger Button
The Stinger Transition Effect is currently under development so this button
cannot be used.
FTB Button
The FTB button (Fade To Black) fades the current video program source to black.
When pressed again it acts in reverse from complete black to the currently