Datavideo SE-4000 8-Channel 4K Video Switcher - Manual (Page 12)

12
1.2 Control Panel Overview
Perform video switching and other relevant controls on the Control Panel.
Preview Row (PVW)
Selection of preview video
source.
Program Row (PGM)
Selection of program video
source.
Source Row
Select a video source for
the Program/Preview
channels
T-Bar – Manual Transition
Move the T-Bar up or down to
switch between Preview and
Program.
Logos 1 & 2
Logo insertion on
preview and program
outputs once
enabled.
DSK Selection
Enabling DSK on preview
and program outputs.
Keyer Selection
Enabling the pre-assigned
keyers (Chroma, Luma,
Linear, DSK and PIP) on
Program and Preview views.
FTB – Fade To Black
Fades the program view
to black once pressed.
AUTO TAKE
Press to trigger
automatic
transition. CUT
A hard cut
between video
sources.
Transition Type Selection
Selection of Clip, MIX or
WIPE transition effect.
SHIFT
Press the SHIFT button to
activate the Source row for
switching channels 3/4/7/8
between SDI and HDMI
interfaces.
AUX
Press the AUX button to
activate the Source row for
assigning a video source to
an output channel.
Frame Store
Press and hold the FS button
then press a channel button
on the Preview row to
switch the selected channel
to a pre-loaded still picture.
Grab
Press to capture images
from the Program output.
GUI Control
The GUI control buttons are
designed for opening the
GUI on the built-in 5 inch
monitor and navigating
through the sub menus. You
can also directly access the
sub menus by pressing the
corresponding buttons.
5 inch LCD Screen
A touchscreen user interface
allowing you to access
various functions of the
switcher via the GUI menu.