Datavideo SE-4000 8-Channel 4K Video Switcher - Manual (Page 47)

47
Gain
Audio out volume
Range: -60 – 24 (dB) with default = 0 dB
Delay
Audio out delay
Range: 0 – 340 ms with default = 0 ms
Fi
les
–
U
ser
Load Memory
Opens a numeric
keypad to enter a
memory location
Memory Selection from 1 to 1000 (Default:
None)
OK Tap OK to load the memory location entered
Save Memory
Opens a numeric
keypad to enter a
memory location
Memory Selection from 1 to 1000 (Default:
None)
OK
Tap OK to save to the memory location
entered
Fi
les
–
Stil
ls
Load Still
Destination Input 1 – 8
Still Number 0 – 999
Load Button
Tap Load to load from the selected still
number
Save Still
Source Input 1 – 8
Still Number 0 – 999
Save Button Tap Save to save to the selected still number
Grab Still
Grab Destination Input 1 – 8
Grab
Tap Grab to grab the current program view to
the selected destination
Delete Still
Still Number 0 – 999
Delete Button
Tap Delete to remove the still picture from the
selected still number
Fi
les
–
Cli
p Load Clip
Clip Memory Locations 0 – 999
Load Button
Tap Load to load the selected clip
Clip Settings
Sets the clip’s start and end frames and the
transition frame.
Clear Clip Clear Clear the loaded clip
Delete Clip Clip Memory Locations 0 – 999
Delete Button
Tap to remove the selected clip
Fi
les
–
L
o
go
Load Logo
Logo Destination
Logo 1
Logo 2
Logo Memory
Location
Memory locations from 0 to 999
Load Button Loads the selected logo
Clear Logo Clear Clear the loaded logo
Delete Logo
Logo Memory
Location
Memory locations from 0 to 999
Delete Button Remove logo from a memory location
Logo 1
X X coordinate from -50 to +50
Y Y coordinate from -50 to +50
Logo 2
X X coordinate from -50 to +50
Y Y coordinate from -50 to +50
Fi
les
–
Ani
-
Lo
go
Load Ani Logo
Ani Logo Destination
Logo 1
Logo 2
Ani Logo Memory
Location
Memory locations from 0 to 999
Load Button Loads the selected ani logo