Datavideo SE-4000 8-Channel 4K Video Switcher - Manual (Page 14)

14
Power Supply
1.3 Connecting the Power Supply
Connect the DC output plug of the supplied AC adapter to the DC IN 12V connector on the
rears of the switcher’s main unit and control panel and then connect the AC adapter to a
power supply.
To start, first locate and turn ON the respective power switches at the rear of the control
panel as well as the front panel of the main processing unit.
To shut off the switcher, simply turn OFF both power switches.
AC Adapter (Main Unit)
AC Adapter (Control Panel)