Datavideo SE-4000 8-Channel 4K Video Switcher - Manual (Page 45)

45
Sat
PIP Border Color Saturation (0 - 100% Default:
0%)
Hue PIP Border Color Hue (0 - 359 Default: 0)
Width PIP Border Width (0 - 100% Default: 0%)
Soft
Distinctiveness of Border Edge (0 - 100%
Default: 0%)
Opac Border transparency (0 - 100% Default: 0%)
Direction Direction of light source (0 - 359 Default: 0).
Shade Matte
Luma Shade Matte Luma (0 - 100% Default: 0%).
Sat
Shade Matte Saturation (0 - 100% Default:
0%).
Hue Shade Matte Color (0 - 359 Default: 0).
Shade Soft
This blurs or softens the Shade Matte area (0 -
100% Default: 0%).
Shade Pos
Sets position of the boundary line between
Shade Matte and Border Matte (0 - 100%
Default: 0%).
Inputs
Input
Source
Selection of an input to set the mode (Default:
Input 1).
Input 1-8
Mode
Three input modes are Live, Freeze, and Still
(Default is Live).
Type
HDMI
SDI
Auto
Channels 3, 4, 7 and 8 are
SDI/HDMI shared input
channels, Depending on
the physical connections
at the rear panel, select
the input interface
accordingly.
Mode
OFF Mode disabled
TC-200 Md
Enables the built-in TC-
200
Note: This option is only
available on HDMI inputs
(HDMI 9 (CH3), 10 (CH4),
11 (CH7) and 12 (CH8)) so
select HDMI in Type after
selecting input 3, 4, 7 or
8.
Zoom Md
Zoom: Enlarges or shrinks
the selected input image
horizontally and vertically
at the same time.
X: Enlarges or shrinks the
selected input image
horizontally.
Y: Enlarges or shrinks the
selected input image
vertically.
Proc Amp
Black Black level (0 - 100% Default: 0%)
White White level (0 - 100% Default: 0%)
Chrom Chroma level (0.0 - 16.0 Default: 0)