Datavideo SE-4000 8-Channel 4K Video Switcher - Manual (Page 41)

41
Chapter 5 Graphical User Interface
The switcher’s GUI menu allows the user to perform several configurations of image effects,
such as Picture-in-Picture, chroma key, subtitle overlay, transition effects, still pictures, etc.
The user can also configure the I/O by selecting different input and output combinations. In
addition, in the setup menu, the user is allowed to adjust the keyboard brightness, set the
menu language, reset the device, customize network settings and upgrade the firmware.
Note: After the power button is pressed, you will be prompted on the 5 inch LCD screen to
confirm the shutdown. Select YES and the last device settings will be automatically saved
before it’s turned off.
Main Sub Options and Parameters
Start
Transition
(Duration)
M/E Mix Effect (0 - 999 Default: 0)
DSK Downstream Key (0 - 999 Default: 0)
FTB Fade-to-Black (0 - 999 Default: 0)
Type
Mix
Wipe
Clip Default
Matte
Luma
Background Matte Luma (0 – 100% Default:
0%)
Sat
Background Matte Saturation (0 – 100%
Default: 0%)
Hue Background Matte Hue (0 – 359 Default: 0)
Wipe Effects
Wipe Wipe Effect Presets (1 - 32 Default: 1)
Soft Border Softness (0 - 100% Default: 0%)
Width Border Width (0 - 100% Default: 0%)
Border
Luma Border Color Luma (0 - 100% Default: 0%)
Sat Border Color Saturation (0 - 100% Default: 0%)