Panasonic TH-65SQ1WA 65" Class 4K HDR Commercial Monitor - Manual (Page 42)

42
English
Digital ZOOM
Select the screen areas (25 areas) to zoom in, and
zoom in the selected image areas Ч2, Ч3 or ×4.
(Assign [Digital zoom] to a numeric button in [Setup] -
[Function button settings], and then operate.)
Enter
Select
Exit
1 Set the digital zoom mode.
When [Digital zoom] is assigned to a numeric
button in [Function button settings], and then
operated by the button, the digital zoom mode is
set. (see page 84)
×1
Exit RETURN
ENTER
The screen aspect is set to [Full], and the digital
zoom operation guide is displayed.
2 Select the image areas to zoom in.
Select pressing .
×1
Exit RETURN
ENTER
Digital Zoom operation guide
3 Switch the zoom ratio for the screen
areas.
Switches every time is pressed.
Ч1 Ч2 Ч3 Ч4
Ч1 Exit ×2 Exit ×3 Exit ×4 Exit
● If no operation is performed for the period set for
[Menu display duration] (see page 86 ) (5 ‒ 180
seconds) when the zoom ratio for the screen is
“×1” , the unit exits the zoom mode.
● If no operation is performed for approx. 3 seconds
when the zoom ratio for the screen is “Ч2”,
“Ч3” or “×4” , the digital zoom operation guide
display disappears. Pressing any of the
buttons displays the guide again.
4 Exit the digital zoom mode.
Press to exit the mode.
The screen returns to the previous state just before
entering the digital zoom mode, and the digital zoom
operation guide display disappears.
● Press any of the following buttons to exit the
mode. Then, the operation of the pressed button
is performed.
Remote Control:
> <1> ‒ <6>
Unit:
<- (Unit)>
● When the screen saver timer starts up, the digital
zoom mode finishes.
● When the power is turned OFF, a force-quit is
performed.
• When the power is turned OFF by pressing the
.
• When the display is turned OFF at the
Power On / Off button>
• When the power is turned OFF by the off-timer
• When the power is turned OFF by [No signal
power off] or “Power management”.
Note
● Use the remote control for operation. Some of the
operations cannot be performed with the buttons on
the main unit.
● In the following cases, the digital zoom mode is not
available.
• When [Multi display settings] - [Multi screen
display] is set to [On]
• When [Portrait settings] - [Portrait display] is set
to [On]
• When the screen saver is in operation
• When Screen Transfer / USB / MEMORY VIEWER
input is selected.
● The zoomed image is rougher than the original
image.
● When using the remote control with model number
DPVF1615ZA, the button can be used for
operation.