Roland SP-404MKII Creative Sampler and Effector - Manual (Page 95)

Monitoring with Headphones (CUE)
95
Monitoring with Headphones (CUE)
Adjusts the balance of the audio output from the PHONES jack.
When the sample audio is sent to CUE, the audio is only output from the PHONES jack (and is not output to the LINE OUT jack or
USB port). When playing live or in similar situations, only the player can preview (check) the sample’s sound in headphones.
1. Hold down the [SHIFT] button and press the pad [3].
The unit switches to CUE mode.
2. Adjust the volume balance with the CTRL [3] knob.
When this is set to the “C” side, you can monitor the sample audio sent to CUE. When this is set to the “M” side, you can
monitor the audio output to the LINE OUT jacks and the USB port.
3. To exit CUE mode, press the [EXIT] button.
You can’t send two or more samples to CUE at the same time (playback is not possible).