Roland HandSonic HPD-20 Digital Hand Percussion Instrument - Manual (Page 68)

68
Error Messages
If an error message appears in the HandSonic’s screen, refer to this list of messages and take the appropriate action.
Message Meaning Action
Messages about the HandSonic itself
Internal memory full. The QUICK REC storage capacity is full. —
User Inst memory full. The user instrument memory is full.
Delete unneeded user instruments (p. 37).
In some cases, optimizing the area may allow you to import the
sound (p. 55).
MIDI buffer full.
The HandSonic attempted to transmit or receive
more MIDI messages in a short time than could
be processed.
Decrease the amount of MIDI messages.
Data memory was
damaged.
There is a problem with internal memory. A factory reset will be executed automatically.
Device error. There is a problem with the internal system.
Contact your retailer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the “Information” page.
Write Protect is ON.
The operation cannot be executed because “Write
Protect” is ON.
If you want to execute this operation, turn Write Protect off (p. 65).
The module will turn off
soon.
The power will soon turn off because of the “Auto
Off” setting.
If you don’t want the power to turn off, press any button or strike
a pad.
You can also disable the “Auto Off” setting so that the power does
not turn off automatically (p. 65).
USB-related messages
USB memory full.
The USB flash drive does not have enough free
space.
Either delete unneeded data, or use another USB flash drive.
Check the USB memory. The USB flash drive is not working correctly. Check the USB flash drive.
Could not read this file.
The specified data does not exist on the USB
flash drive. Alternatively, the saved data has been
damaged.
Check the file on the USB flash drive.
Unsupported format. This file format is not supported.
USB device error.
A USB device not supported by the HandSonic is
connected.
Immediately disconnect the USB device. Check whether there might
be a problem with the USB MEMORY connector.
USB memory busy.
Data could not be read/written fast enough
from/to the USB flash drive.
Use a different USB flash drive.
Use USB flash drive sold by Roland. We cannot guarantee operation
if other products are used.
USB memory is not
connected here.
A USB flash drive is not connected to the
HandSonic.
Connect a USB flash drive.
Shortcuts
Action Function
[SHIFT] + [-] [+] or value knob Change the value in larger steps.
[SHIFT] + [ ] [ ] Switch the pad that you’re editing.
[SHIFT] + [EXIT] Silence all sounding notes (p. 36).
[SHIFT] + [PITCH]/[EFFECT] Access the realtime modify setting window.
[SHIFT] + [ROLL] Access the roll speed setting screen.
[KIT] + [-] [+] In the kit screen, adjust the display contrast.
[SHIFT] + [D-BEAM] From the kit screen, jump to the D-BEAM Settings screen.
[SHIFT] + strike a pad
In the kit screen, check the instrument that’s assigned to a pad.
In the INST or INST–EDIT screen, sound only the layer (instrument A or B) that’s selected by the cursor.
[SHIFT]+[ENTER] In the INST or INST–EDIT screen, copy the value of the selected parameter to all pads (p. 23).
Appendix