Adjusting the ambience, Applying ambience to the multi-effect’s sound, Sound editing – Roland HandSonic HPD-20 Digital Hand Percussion Instrument User Manual
Page 29: Multi-effect and ambience routing

W
ha
t is
the
HandS
onic?
Q
uick
G
uide
Frequen
tly
U
sed
Func
tions
Par
amet
er
G
uide
A
ppendix
Sound Editing
29
Adjusting the ambience
1.
Choose MENU
g
FX
g
AMBIENCE
g
EDIT.
The AMBIENCE–EDIT screen will appear.
2.
Use the cursor [ ] [ ] buttons to select a parameter, and use the value
knob to edit the value.
* For details on each parameter, refer to “Sound List” (PDF file).
Applying ambience to the multi-effect’s sound
If you’ve applied a multi-effect unit to the sound of instruments, you can apply ambience to the sound that’s been modified
by the multi-effects.
1.
Choose MENU
g
FX
g
AMBIENCE
g
SEND
g
MFX.
The AMBIENCE SEND–MFX screen will appear.
2.
Use the cursor [ ] [ ] buttons to select MFX1–3, and use the value knob to
edit the value.
Specify the amount of ambience that will be applied to the sound from each multi-
effect.
With a setting of “0,” no ambience will be applied.
AMBIENCE–EDIT screen
AMBIENCE SEND–MFX screen
Multi-effect and ambience routing
The sound of a pad’s instrument A is sent to ambience (AMBIENCE SEND–PAD) before it enters the multi-effect
(MFX1–3). This allows you to adjust the amount of ambience independently for each pad of each instrument.
Applying a multi-effect can modify the sound dramatically, but the sound sent to ambience will not be modified by the
multi-effect.
You can use “AMBIENCE SEND–MFX” if you want the sound that’s been processed by the multi-effect to be sent to
ambience. However, since the multi-effect is also receiving sound from other pads, it won’t be possible to adjust the
ambience send individually for each pad.
OFF
MFX1
MFX2
MFX3
EQ
Inst A
AMBIENCE
MULTI-FX–
ASSIGN
AMBIENCE
SEND–PAD
AMBIENCE
SEND MFX