Roland HandSonic HPD-20 Digital Hand Percussion Instrument - Manual (Page 28)

Sound Editing
28
Ambience
This effect unit adds reverberation, creating the sensation that you’re performing in a hall or studio.
You can adjust the amount of ambience for each instrument assigned to each pad.
Applying ambience
1.
Choose MENU g FX g AMBIENCE g SEND g PAD.
The AMBIENCE SEND–PAD screen will appear.
2.
Strike a pad to select it, and use the cursor [ ] [ ] buttons to select
instrument A/B.
3.
Use the value knob to edit the value.
This specifies the amount of ambience that will be applied.
With a setting of “0,” no ambience will be applied.
* Even if you’re applying a multi-effect to an instrument, the ambience will be applied to the sound before it has been
processed by the multi-effect. You can also apply ambience to the sound produced by the multi-effect (p. 29).
* You can also use the MENU g INST g EDIT parameter “Amb Send.”
Selecting the ambience type
1.
Choose MENU g FX g AMBIENCE g TYPE.
The AMBIENCE–TYPE screen will appear.
2.
Use the value knob to specify the ambience type.
With a setting of “OFF,” no ambience will be applied.
Ambience type list
No. Name Explanation No. Name Explanation
1 BOOTH Recording booth 6 BALLROOM Dance hall
2 STUDIO Recording studio 7 CONCERT HALL Large concert hall
3 BASEMENT
Underground room with numerous
reflections
8 EXPO HALL Broad space
4 JAZZ CLUB Small club 9 GATE Reverberation is cut off sharply
5 ROCK CLUB Large club 10 SPIRAL Spiral-like reverberation
* For details on each type, refer to “Sound List” (PDF file).
AMBIENCE SEND–PAD screen
AMBIENCE–TYPE screen