Canon PowerShot SX60 HS - Manual (Page 95)

95
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Changing Settings during Recording
Settings can also be adjusted while you are recording a movie, by
following step 2 in “Recording Movies at Specific Shutter Speeds and
Aperture Values” (= 95). However, any changes in brightness are
recorded in the movie.
● To make the sound of the [ ] dial quieter, press the [ ][ ]
buttons and adjust the setting.
● You can switch between adjusting the shutter speed, aperture
value, ISO speed, and focal position during MF (= 79) movie
recording each time you press the [ ] button. Press the [ ][ ]
buttons to configure these settings.
Recording Movies at Specific Shutter Speeds and
Aperture Values
Still Images Movies
Set your preferred shutter speed, aperture value, and ISO speed.
For details on available shutter speeds, aperture values, and ISO speeds,
see “Specific Shutter Speeds” (= 92), “Specific Aperture Values”
(= 93), and “Changing the ISO Speed” (= 73).
1
Enter [ ] mode.
● Set the mode dial to [ ].
● Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 29).
2
Configure the setting.
● Press the [ ] button to choose shutter
speed, aperture value, or ISO speed,
and then turn the [ ] dial to choose
a value.
● Some shutter speeds may cause flickering on the screen when
recording under fluorescent or LED lighting, which may be recorded.
● With [ ], the exposure level mark moves when the shutter button
is pressed halfway, showing the difference from the standard
exposure level.
● With settings other than [ ], an exposure level mark based on
your specified shutter speed and aperture value is shown for
comparison to the standard exposure level.