Canon PowerShot SX60 HS - Manual (Page 81)

81
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Digital Tele-Converter
Still Images Movies
The focal length of the lens can be increased by approximately 1.6x or
2.0x. This can reduce camera shake because the shutter speed is faster
than it would be if you zoomed (including using digital zoom) in to the
same zoom factor.
● Press the [ ] button, choose
[Digital Zoom] on the [ ] tab, and then
choose the desired option (= 30).
● The view is enlarged and the zoom factor
is displayed on the screen.
● The digital tele-converter cannot be used with digital zoom
(= 40) or AF-point zoom (= 54).
● The shutter speed may be equivalent when you move the zoom
lever all the way toward [
] for maximum telephoto, and when
you zoom in to enlarge the subject to the same size following
step 2 in “Zooming In Closer on Subjects (Digital Zoom)” (= 40).
Storing the Zoom or Focal Position
Still Images Movies
Zoom positions set with the zoom lever or focal positions set manually are
normally reset once you turn the camera off, but they can also be stored
on the camera.
Storing the Zoom Position
● Press the [ ] button, choose
[Recall Zoom/MF Settings] on the
[ ] tab, press the [ ] button, and then
choose [On] (= 30).
Storing the Focal Position
● Follow the steps in “Storing the Zoom
Position” (= 81).
● Choose [MF Memory], and then choose
[On] (= 30).
● Zoom positions set in [ ] Auto mode (= 42) cannot be stored.