Adjusting iso auto settings, Changing the noise reduction level (high iso nr), Auto exposure bracketing (aeb shooting) – Canon PowerShot SX60 HS User Manual
Page 74
74
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Changing the Noise Reduction Level (High ISO NR)
You can choose from 3 levels of noise reduction: [Standard], [High], [Low].
This function is especially effective when shooting at high ISO speeds.
●
Press the [
] button, choose [High
ISO NR] on the [ ] tab, and then choose
the desired option (= 30).
●
Not available with [ ] or
[ ]
Auto Exposure Bracketing (AEB Shooting)
Still Images
Movies
Three consecutive images are captured at different exposure levels
(standard exposure, underexposure, and then overexposure) each
time you shoot. You can adjust the amount of underexposure and
overexposure (relative to standard exposure) from –2 to +2 stops in
1/3-stop increments.
1
Choose [ ].
●
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 29).
●
To view the automatically determined ISO speed when you have
set the ISO speed to [AUTO], press the shutter button halfway.
●
Although choosing a lower ISO speed may reduce image
graininess, there may be a greater risk of subject and camera
shake in some shooting conditions.
●
Choosing a higher ISO speed will increase shutter speed, which
may reduce subject and camera shake and increase the flash
range. However, shots may look grainy.
Adjusting ISO Auto Settings
Still Images
Movies
When the camera is set to [AUTO], maximum ISO speed can be specified
in a range of [400] – [3200], and sensitivity can be specified in a range of
three levels.
1
Access the setting screen.
●
Press the [
] button, choose [ISO
Auto Settings] on the [ ] tab, and then
press the [ ] button (= 30).
2
Configure the setting.
●
Choose a menu item to configure, and
then choose the desired option (= 30).
●
You can also access the [ISO Auto Settings] screen when the
ISO speed setting screen (= 73) is displayed, by pressing the
[
] button.