Canon PowerShot SX60 HS - Manual (Page 160)

160
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Using Lens Filters (Sold Separately)
Still Images Movies
Attaching a lens filter to the camera protects the lens and allows you
to shoot with various effects. To attach a lens filter, you will need Filter
Adapter FA-DC67A (sold separately).
1
Attach the filter adapter.
● Make sure the camera is off.
● Align the notches on the camera and the
filter adapter and turn the adapter in the
direction of the arrow until locked.
● To remove the filter adapter, turn it in the
opposite direction.
2
Attach a filter.
● Turn the filter in the direction of the arrow
to attach it to the camera.
● Make sure not to attach the filter too
tightly. Doing so could prevent removal of
the filter and damage the camera.
● We recommend the use of genuine Canon filters (67 mm dia.).
● When not using auto focus to shoot, set the manual focus option
[Safety MF] to [On].
● If you use the built-in flash with the filter adapter attached,
portions of the image may appear darker.
● When using the filter adapter, be sure to use only one filter at a
time. Attaching multiple filters, or accessories such as a heavy
lens, may cause the attachments to fall off and become damaged.
● Do not grip the filter adapter tightly.
● Remove the filter adapter when not using a filter.
Using a Lens Hood (Sold Separately)
Still Images Movies
For wide-angle shots of backlit subjects without using the flash, attach
optional Lens Hood LH-DC90 to prevent light outside the angle of view
from entering the lens.
● Make sure the camera is off.
● Align the lens hood mark (2) with the
camera mark (1), and turn the lens hood
in the direction of the arrow until it locks
in place.
● To remove the lens hood, turn it in the
opposite direction.
● To attach the lens hood inverted (as
shown) when the hood is not used, align
the lens hood mark (2) with the camera
mark (1), and turn the lens hood in the
direction of the arrow until it locks in
place.
● Vignetting may occur if you use the built-in flash when the lens
hood is attached.
● The filter adapter and a lens hood cannot be attached to the
camera at the same time.
(2)
(1)
(2)
(1)