Special modes for other purposes, Auto shooting after face detection (smart shutter), Mode (= 65 – Canon PowerShot SX60 HS User Manual
Page 65
65
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
●
You can also shoot as usual by pressing the shutter button.
●
The camera can detect smiles more easily when subjects face
the camera and open their mouth wide enough so that teeth
are visible.
●
To change the number of shots, press the [ ][ ] buttons
after choosing [
] in step 1. [Blink Detection] (= 55) is only
available for the final shot.
●
Automatic shooting is not available while you are holding down
the [
] button.
Using the Wink Self-Timer
Still Images
Movies
Aim the camera at a person and press the shutter button all the way
down. The camera will shoot about two seconds after a wink is detected.
1
Choose [ ].
●
Follow steps 1 – 2 in “Specific Scenes”
(= 59) and choose [ ], and then
press the [ ] button.
●
Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
2
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame is displayed
around the face of the person who
will wink.
3
Press the shutter button all the
way down.
●
The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
●
The lamp blinks and the self-timer sound
is played.
Special Modes for Other Purposes
Auto Shooting after Face Detection (Smart Shutter)
Still Images
Movies
Auto Shooting after Smile Detection
Still Images
Movies
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
1
Choose [ ].
●
Follow steps 1 – 2 in “Specific Scenes”
(= 59) and choose [ ], and then
press the [ ] button.
●
Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
●
The camera now enters shooting standby
mode, and [Smile Detection on] is
displayed.
2
Aim the camera at a person.
●
Each time the camera detects a smile,
it will shoot after the lamp lights up.
●
To pause smile detection, press the [ ]
button. Press the [ ] button again to
resume detection.
●
Switch to another mode when you finish shooting, or the camera
will continue shooting each time a smile is detected.