Canon PowerShot SX60 HS - Manual (Page 3)

3
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Part Names and Conventions in
This Guide
(16)
(14)
(15)
(12)
(13)
(1)
(11)
(2) (9) (10) (3) (6) (7) (5) (4) (8) (3)
(18)(19) (20) (17)
(1) Zoom lever
Shooting: [ (telephoto)] /
[ (wide angle)]
Playback: [ (magnify)] /
[ (index)]
(2) Shutter button
(3) Strap mount
(4) Front dial
(5) Mode dial
(6) Flash
(7) Microphone
(8) Lamp
(9) Speaker
(10) External microphone IN terminal
(11) Focal length markings (approx.)
(12) Lens
(13) Lens hood/filter adapter mount
(14) [
(Framing Assist – Seek)]
button
(15) (N-Mark)*
(16) [ (Framing Assist – Lock)]
button
(17) Tripod socket
(18) Lock release switch
(19) Memory card/battery cover
(20) DC coupler cable port
* Used with NFC features (= 123).
Preliminary Notes and Legal
Information
● Take and review some test shots initially to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries
and affiliates, and its distributors are not liable for any consequential
damages arising from any malfunction of a camera or accessory,
including memory cards, that result in the failure of an image to be
recorded or to be recorded in a way that is machine readable.
● Images recorded by the camera shall be for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note
that even for personal use, photography may contravene copyright
or other legal rights at some performances or exhibitions, or in some
commercial settings.
● For information on camera warranty or Canon Customer Support,
please refer to the warranty information provided with your camera
User Manual Kit.
● Although the LCD monitor and viewfinder are produced under
extremely high-precision manufacturing conditions and more than
99.99% of the pixels meet design specifications, in rare cases some
pixels may be defective or may appear as red or black dots. This does
not indicate camera damage or affect recorded images.
● The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
● When the camera is used over an extended period, it may become
warm. This does not indicate damage.