Nikon D500 - Manual (Page 279)

253
A GPS unit can be connected to the ten-pin remote terminal,
allowing the current latitude, longitude, altitude, Coordinated
Universal Time (UTC), and heading to be recorded with each
photograph taken. The camera can be used with optional GP-1
and GP-1A GPS units (see below; note that these units do not
provide the compass heading), or with compatible third-party
units connected via an optional MC-35 GPS adapter cord
(
0 336).
❚❚ GP-1/GP-1A GPS Units
These optional GPS units are designed for use with Nikon digital
cameras. For information on connecting the unit, see the
manual provided with the device.
Location Data
A The o Icon
Connection status is shown by the o icon in
the information display:
•
o (static): Location data acquired.
• o (flashing): The GPS device is searching for
a signal. Pictures taken while the icon is
flashing do not include location data.
• No icon: No new location data have been
received from the GPS device for at least
two seconds. Pictures taken when the
o icon is not displayed do not
include location data.
A Smart Devices
To download location data from a smart device and embed it in
subsequent photographs, establish a wireless connection and select
Yes for Location data > Download from smart device in the setup
menu (
0 307).
A Coordinated Universal Time (UTC)
UTC data is provided by the GPS device and is independent of the
camera clock.