Nikon D500 User Manual
Page 176
150
A
Exposure and Flash Bracketing
In continuous low speed, continuous high speed, and quiet
continuous modes, shooting will pause after the number of shots
specified in the bracketing program have been taken. Shooting will
resume the next time the shutter-release button is pressed. In self-
timer mode, the camera will take the number of shots selected in Step
1 on page 147 each time the shutter-release button is pressed,
regardless of the option selected for Custom Setting c3 (Self-
timer) > Number of shots (
0 296); the interval between shots is
however controlled by Custom Setting c3 (Self-timer) > Interval
between shots. In other modes, one shot will be taken each time the
shutter-release button is pressed.
If the memory card fills before all shots in the sequence have been
taken, shooting can be resumed from the next shot in the sequence
after the memory card has been replaced or shots have been deleted
to make room on the memory card. If the camera is turned off before
all shots in the sequence have been taken, bracketing will resume from
the next shot in the sequence when the camera is turned on.
A
Exposure Bracketing
The camera modifies exposure by varying shutter speed and aperture
(programmed auto), aperture (shutter-priority auto), or shutter speed
(aperture-priority auto, manual exposure mode). If On is selected for
ISO sensitivity settings > Auto ISO sensitivity control (
modes P, S, and A and no flash is attached, the camera will modify
exposure by varying ISO sensitivity and only vary shutter speed and/or
aperture if the limits of exposure system are exceeded. Custom Setting
e6 (Auto bracketing (mode M),
0 301) can be used to change how
the camera performs exposure and flash bracketing in manual
exposure mode. Bracketing can be performed by varying flash level
together with shutter speed and/or aperture, or by varying flash level
alone.