Nikon D500 - Manual (Page 133)

107
A
AF-S/AF-I Teleconverters
If 3D-tracking or auto-area AF is selected for AF-area mode when an
AF-S/AF-I teleconverter is used, single-point AF will automatically be
selected at combined apertures slower than f/5.6.
A
Manual Focus
Single-point AF is automatically selected when manual focus is used.
A See Also
For information on how autofocus adjusts to changes in the distance
to the subject, see Custom Setting a3 (Focus tracking with lock-on,
0 292). To adjust settings for 3D-tracking, use Custom Settings a4
(3D-tracking face-detection,
0 293) and a5 (3D-tracking watch
area, 0 293). See Custom Settings a7 (Store by orientation, 0 293)
for information on choosing different focus points and/or AF-area
modes for portrait- and landscape-orientation photographs, a9 (Limit
AF-area mode selection,
0 293) for information on limiting AF-area
mode selection, a12 (Focus point options, 0 294) for information on
choosing how the focus point is displayed, and f4 (Customize
command dials) > Change main/sub (
0 302) for information on
using the main command dial to choose the AF-area mode. See page
48 for information on the autofocus options available in live view or
during movie recording.