Nikon D500 - Manual (Page 238)

212
A
Reconnecting
As long as the channel, link mode, and other settings remain the same,
the camera will automatically connect to previously paired flash units
when you select remote mode and Steps 3–5 can be omitted. The flash
unit LINK lamp lights green when a connection is established.
A
Radio-Controlled Flash Units
Radio-controlled flash units can be combined with any of the following
flash units mounted on the camera accessory shoe:
• SB-5000: Before attaching the flash unit, set it to radio-controlled
master flash mode (a d icon will appear at the top left corner of the
display) and choose group or remote repeating flash control. Once
the unit is attached, settings can be adjusted using the controls on
the flash unit or the options listed in the camera menus under Group
flash options > Master flash or under “M” in the Remote repeating
options display.
• SB-910, SB-900, SB-800, SB-700: Configure the flash for stand-alone use
and use the controls on the flash unit to adjust flash settings.
• SB-500, SB-400, SB-300: Mount the unit on the camera and adjust
settings using the camera Group flash options > Master flash
option.