Nikon D500 - Manual (Page 202)

176
6
Measure white balance.
Press the center of the multi selector
or press the shutter-release button all
the way down to measure white
balance. The time available to
measure white balance is that
selected for Custom Setting c4
(Monitor off delay) > Live view
(
0 296).
If the camera is unable to measure
white balance, the message shown at
right will be displayed. Choose a new
white balance target and repeat the
process from Step 5.
7
Exit direct measurement mode.
Press the
U button to exit direct measurement mode.
White balance presets can be viewed
by selecting Preset manual for White
balance in the photo or movie
shooting menu. The position of the
targets used to measure preset white
balance is displayed on presets
recorded during live view.
D Measuring Preset Manual White Balance (Live View)
Preset manual white balance can not be measured while an HDR
exposure is in progress (
0 191) or when None is selected for Photo
live view display WB ( 0 51).