ProSoft Technology 5204-DFNT-PDPMV1 - Manual (Page 49)

DFNT ♦ ProLinx Gateway Configuring the Gateway
EtherNet/IP Explicit Messaging Client/Server Protocol Manual
ProSoft Technology, Inc. Page 49 of 124
July 24, 2013
3.8 Downloading the Project to the Module Using a Serial COM port
For the module to use the settings you configured, you must download (copy) the
updated Project file from your PC to the module.
1 In the tree view in ProSoft Configuration Builder, click once to select the
module.
2 Open the Project menu, and then choose M ODULE /D OWNLOAD . The program
will scan your PC for a valid com port (this may take a few seconds). When
PCB has found a valid COM port, the Download
dialog box will open.
3 Choose the COM port to use from the dropdown list, and then click the
D OWNLOAD button.
The module will perform a platform check to read and load its new settings.
When the platform check is complete, the status bar in the Download
dialog
box will display the message Module Running.