ProSoft Technology 5204-DFNT-PDPMV1 - Manual (Page 102)

Reference DFNT ♦ ProLinx Gateway
Protocol Manual EtherNet/IP Explicit Messaging Client/Server
Page 102 of 124 ProSoft Technology, Inc.
July 24, 2013
Next select the T AG D ATABASE option from the E DIT M ODE tab. After selecting the
option, the following dialog box is displayed:
Set up tags for each element to be transferred between RSView and the DFNT
module. In the example above, D
ATA 1 is associated with the first element in the
DFNT module’s database (N10:0). A tag should be setup for each register in the
module’s database to be interfaced. If RSView is set in run mode, values for the
tags should
match those in the module’s database. Use the module controller tag
names if using CIP data table read and write operations.
Refer to the RSView documentation for a full discussion of database tags and
reading and writing data between RSView and a processor.