ProSoft Technology PTQ-101M - Manual (Page 91)

Module Configuration PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc. Page 91 of 181
May 14, 2008
4 From the Transfer menu in HyperTerminal, select Send File.
The Send File dialog appears.
5 Use the Browse button to locate the configuration file your computer.
Note: This procedure assumes that you are uploading a newly edited configuration file from your
PC to the module. However, configuration files are also available on the ProSoft CD as well as the
ProSoft Technology web site.
6
Select Zmodem as the protocol.