ProSoft Technology PTQ-101M - Manual (Page 49)

Configuring the Processor with UnityPro XL PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc. Page 49 of 181
May 14, 2008
4 Expand the Supply folder, and then select your power supply from the list.
Click OK to continue.
5 Repeat these steps to add any additional devices to your Quantum Rack.
4.2 Add the PTQ Module to the Project
The next step is to add the PTQ module.
1 Expand the Communication tree, and select GEN NOM. This module type
provides extended communication capabilities for the Quantum system, and
allows communication between the PLC and the PTQ module without
requiring additional programming.