ProSoft Technology PTQ-101M - Manual (Page 121)

Reference PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc. Page 121 of 181
May 14, 2008
Offset Parameter Description
41 Requests This word contains the total number of messages
transmitted on channel 1.
42 Responses This word contains the total number of messages
received on channel 1.
43 Err Sent This word contains the number of error messages
sent on channel 1.
44 Err Received This word contains the number of error messages
received on channel 1.
45 Cfg Err This bit mapped word is used to recognize any
configuration errors for channel 1. Refer to the
configuration error word table (page 152) for a
definition of each bit.
46 Current Error This word contains the error code for the current
command executing on channel 1.
47 Last Error This word contains the error code for the last error
recognized on channel 1.
48 to 63 Spare Not used
Read Module's Time to Processor (9970)
If a value of 9970 is placed in the control register, the processor will read the
module's current time.
Block Format for Write
The following table shows the block format for write:
Word Offset in Block Data Field(s) Description
0 Sequence Number This number triggers the request for the module.
When this number changes, the module will
process the command control request.
1 Block ID This field contains the value of 9970 identifying
the block type to the module.
Block Format for Read
The module responds to a valid 9970 request with a block containing the
requested date and time. The block format is shown in the following table:
Word Offset in Block Data Field(s) Description
0 Sequence Number This is the sequence number received by the
module, incremented by one, after the request is
processed.
1 Block ID This word will contain the value of 9970.
2 Year This field contains the four-digit year to be used
with the new time value.
3 Month This field contains the month value for the new
time. Valid Values: 1 to 12.
4 Day This field contains the day value for the new time.
Valid Values: 1 to 31.
5 Hour This field contains the hour value for the new time.
Valid Values: 0 to 23
6 Minute This field contains the minute value for the new
time. Valid Values: 0 to 59.
7 Seconds This field contains the second value for the new
time. Valid Values: 0 to 59.
8 Milliseconds This field contains the millisecond value for the
new time. Valid Values: 0 to 999.