ProSoft Technology PTQ-101M - Manual (Page 108)

PTQ-101M ♦ Quantum Platform Diagnostics and Troubleshooting
IEC 60870-5-101 Master Communication Module
Page 108 of 181 ProSoft Technology, Inc.
May 14, 2008
6.4.9 Sector Database Menu
Press [D] from the Sector Configuration menu to open the Sector Database
menu. Use this command to display the sector database values. Each session
(controlled device) contains one or more data sets (sectors) that are defined by
the vendor of the device.
D = Sector Database Menu
2 = Step Point Data
1 = Double Point Data
0 = Single Point Data
? = Display Menu
3 = Bitstring Point Data
S = Show Again
Redisplays (refreshes) this menu
Displays current page of 100 registers.
Single-point information M_SP_NA_1
Double-point information M_DP_NA_1
Step position information M_ST_NA_1
Bitstring of 32 bit M_BO_NA_1
4 = Normalized Measure Point Data
Measured value, normalized value
M_ME_NA_1
Measured value, scaled value
M_ME_NB_1
6 = Short Float Measure Data
Measured value, short floating point
value M_ME_NC_I
S = Session Menu
I = IEC-101 Master Driver Menu
M = Main Menu
1 = Sector Configuration Menu
M = Return to Sector Goes up one level to previous menu M = Return to Sector Goes up one level to previous menu A = Parameter Short Float Data
Parameter of measured value, short
floating point value P_ME_NC_1
9 = Parameter Scaled Data
Parameter of measured value, scaled
value P_ME_NB_1
8 = Parameter Normalized Data
Parameter of measured value,
normalized value P_ME_NA_1
7 = Integrated Total Point Data Integrated totals M_IT_NA_1
5 = Scaled Measure Point Data
M = Return to Sector Goes up one level to previous menu M = Return to Sector Goes up one level to previous menu B = BCD Integrated Total Data BCD integrated setpoint command
M = Return to Sector Goes up one level to previous menu M = Return to Sector Goes up one level to previous menu M = Return to Sector Menu Goes up one level to previous menu
Redisplaying the Menu
Press [?] to display the current menu. Use this command when you are looking
at a screen of data, and want to view the menu choices available to you.
Redisplaying the Current Page
Press [S] to display the current page of data.
Returning to the Main Menu
Press [M] to return to the Main Menu.