ProSoft Technology PTQ-101M - Manual (Page 42)

PTQ-101M ♦ Quantum Platform Configuring the Processor with Concept
IEC 60870-5-101 Master Communication Module
Page 42 of 181 ProSoft Technology, Inc.
May 14, 2008
11 In the PLC Configuration window, open the Online menu, and then choose
animate. This action opens the RDE Template dialog box, with animated
values in the Value field.
12
Verify that values shown are cycling, starting from address 400065 on up.
13 In the PLC Configuration window, open the Templates menu, and then
choose Save Template as. Name the template ptqclock, and then click OK to
save the template.
14 In the PLC Configuration window, open the Online menu, and then choose
Disconnect. At the disconnect message, click Yes to confirm your choice.
At this point, you have successfully
Created and downloaded a Quantum project to the PLC
Preset values in data registers that will later be monitored in the ProTalk
module.
You are now ready to complete the installation and setup of the ProTalk module.