ProSoft Technology PTQ-101M - Manual (Page 40)

PTQ-101M ♦ Quantum Platform Configuring the Processor with Concept
IEC 60870-5-101 Master Communication Module
Page 40 of 181 ProSoft Technology, Inc.
May 14, 2008
5 In the PLC Configuration window, open the Online menu, and then choose
Reference Data Editor. This action opens the Reference Data Editor dialog
box. On this dialog box, you will add preset values to data registers that will
later be monitored in the ProTalk module.
6 Place the cursor over the first address field, as shown in the following
illustration.
7
In the PLC Configuration window, open the Templates menu, and then
choose Insert addresses. This action opens the Insert addresses dialog box.
8 On the Insert addresses dialog box, enter the values shown in the following
illustration, and then click OK.