ProSoft Technology PTQ-101M - Manual (Page 17)

Configuring the Processor with Concept PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc. Page 17 of 181
May 14, 2008
5 Click OK. This action opens the PLC Configuration dialog box, populated with
the correct values for the PLC you selected.
6
Make a note of the holding registers for the module. You will need this
information when you modify your application as outlined in the ProTalk
application Reference Guides. The Holding Registers are displayed in the
PLC Memory Partition pane of the PLC Configuration dialog box.