ProSoft Technology MVI56-PDPS - Manual (Page 72)

MVI56-PDPS ♦ ControlLogix Platform Reference
Profibus DP Slave Communication Module
Page 72 of 88 ProSoft Technology, Inc.
April 22, 2008
The following illustration shows the pinout for the PROFIBUS Slave port on the
front of the MVI56-PDPS module.
5.6 Constructing a Bus Cable for PROFIBUS DP
The bus cable for connecting PROFIBUS DP devices must be constructed by the
user. A special PROFIBUS cable (twisted pair) is required here. This standard
cable is available from various manufacturers and is a Belden part number of
3079A
To construct the cable, proceed as follows:
1 Cut the cable to the required length.
2 Prepare the cable ends as shown in the illustration (dimensions in mm):
J PVC Jacket
S Braided shielding
3 Remove the PVC jacket J to the indicated length.