ProSoft Technology MVI56-PDPS - Manual (Page 36)

MVI56-PDPS ♦ ControlLogix Platform Configuring the Module with RSLogix 5000
Profibus DP Slave Communication Module
Page 36 of 88 ProSoft Technology, Inc.
April 22, 2008
Byte Bit Position Designation
7 6 5 4 3 2 1 0
1 WD_Fact_1
2 WD_Fact_2
3 MinTSDR
4 Ident_Number_High
5 Ident_Number_Low
6 Group_Ident
7 Spec_User_Prm_Byte
8 to 243 User_Prm_Data
Byte 7 Spec_User_Prm_Byte
Bit Name Significance Default State
0 Dis_Startbit The start bit monitoring in the receiver
is switched off with this bit Dis_Startbit = 1,
That is, start bit monitoring is switched off.
1 Dis_Stopbit Stop bit monitoring in the receiver is
switched off with this bit Dis_Stopbit = 0
That is, stop bit monitoring is not switched
off.
2 WD_Base This bit specifies the time base used
to clock the watchdog.
WD_Base = 0: time base 10 ms
WD_Base = 1: time base 1 ms WD_Base = 0
That is, the time base is 10 ms.
3 to 4 Res To be parameterized with 0 0
5 Publisher_Enable DXB-publisher-functionality of the
SPC3 is activated with this bit Publisher_Enable = 0, DXB-request-
telegrams are ignored;
Publisher_Enable = 1, DXB-request-
telegramme are processed
6 to 7 Res To be parameterized with 0 0
2.8 Download the Project to the Module
In order for the module to use the settings you configured, you must download
(copy) the updated Project file from your PC to the module.
To Download the Project File
1 In the tree view in ProSoft Configuration Builder, click once to select the
MVI56-PDPS module.