Download the sample program to the processor – ProSoft Technology MVI56-PDPS User Manual
Page 18
MVI56-PDPS ♦ ControlLogix Platform
Start Here
Profibus DP Slave Communication Module
Page 18 of 88
ProSoft Technology, Inc.
April 22, 2008
3
Click to select the driver, and then click Configure. This action opens the
Configure Allen-Bradley DF1 Communications Device dialog box.
4
Click the Auto-Configure button. RSLinx will attempt to configure your serial
port to work with the selected driver.
5
When you see the message "Auto Configuration Successful", click the OK
button to dismiss the dialog box.
Note: If the auto-configuration procedure fails, verify that the cables are connected correctly
between the processor and the serial port on your computer, and then try again. If you are still
unable to auto-configure the port, refer to your RSLinx documentation for further troubleshooting
steps.
1.8
Download the Sample Program to the Processor
Note: The key switch on the front of the ControlLogix module must be in the REM position.
To download the sample program from RSLogix 5000 to the ControlLogix processor
1
If you are not already online to the processor, open the Communications
menu, and then choose Download. RSLogix will establish communication
with the processor.