ProSoft Technology MVI56-PDPS - Manual (Page 10)

MVI56-PDPS ♦ ControlLogix Platform Start Here
Profibus DP Slave Communication Module
Page 10 of 88 ProSoft Technology, Inc.
April 22, 2008
ƒ 100 Mbytes of free hard disk space (or more based on application
requirements)
ƒ 256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color
1024 × 768 recommended)
ƒ CD-ROM drive
ƒ HyperTerminal or other terminal emulator program.
Note: You can install the module in a local or remote rack. For remote rack installation, the module
requires EtherNet/IP or ControlNet communication with the processor.
1.2 Package Contents
The following components are included with your MVI56-PDPS module, and are
all required for installation and configuration.
Important: Before beginning the installation, please verify that all of the following items are
present.
Qty. Part Name Part Number Part Description
1 MVI56-
PDPS
Module MVI56-PDPS Profibus DP Slave Communication Module
1 Cable Cable #15, RS232
Null Modem
For RS232 Connection to the CFG Port
1 Cable Cable #14, RJ45 to
DB9 Male Adapter
cable
For DB9 Connection to Module's Port
If any of these components are missing, please contact ProSoft Technology
Support for replacement parts.
1.3 Install ProSoft Configuration Builder Software
You must install the ProSoft Configuration Builder (PCB) software in order to
configure the MVI56-PDPS module. You can always get the newest version of
ProSoft Configuration Builder from the ProSoft Technology web site.
To install ProSoft Configuration Builder from the ProSoft Web Site
1
Open your web browser and navigate to http://www.prosoft-
technology.com/pcb
2 Click the Download Here link to download the latest version of ProSoft
Configuration Builder.