ProSoft Technology MVI56-PDPS - Manual (Page 25)

Configuring the Module with RSLogix 5000 MVI56-PDPS ♦ ControlLogix Platform
Profibus DP Slave Communication Module
ProSoft Technology, Inc. Page 25 of 88
April 22, 2008
The next step in module setup is to define the data to be used to interface with
the module and the ladder logic. Open the Controller Tags Edit Tags dialog box
and enter the values shown in the following example. The MVI56-PDPS module
is defined in the example as PDPS. You can set the tag name to any valid tag
name you desire. If you are using the example ladder logic, this step has already
been performed.
At this point, take the time to adjust the array sizes PDPS data table for the read
and write data. The last step is to add the ladder logic. If you are using the
example ladder logic, adjust the ladder to fit your application. If you are not using
the ladder example, copy the ladder logic shown in the Controller Organization
list shown to your application.