ProSoft Technology MVI56-DFCM - Manual (Page 24)

Using the RSLogix 5000 v16 Add-On Instruction MVI56-DFCM ♦ ControlLogix Platform
User Manual DF1 Half/Full Duplex Master/Slave Serial Communication Module
Page 24 of 106 ProSoft Technology, Inc.
September 24, 2014
Download the manuals and sample program from the ProSoft Technology web site
You can always download the latest version of the sample ladder logic and user
manuals for the MVI56-DFCM module from the ProSoft Technology web site, at
www.prosoft-technology.com/support/downloads
From that link, navigate to the download page for your module and choose the
sample ladder program to download for your version of RSLogix 5000 and your
processor.
2.1 Creating a New RSLogix 5000 Project
1 Open the F ILE menu, and then choose N EW .
2 Select your ControlLogix controller model.
3 Select the R
EVISION of your controller. Depending on the revision, there may
be some small differences in the appearance of dialog boxes.
4 Enter a name for your controller, such as My_Controller.
5 Select your ControlLogix chassis type.
6 Select S
LOT 0 for the controller.